Tangent Devices Color Correction Panels CP200 NEW
| Start Price |
USD 18,995.00 |
| Current Price |
USD 18,995.00 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Friday, July 18, 2008 |
| End Time |
Monday, July 28, 2008 |
| Location |
Southern California |
|
See more about 'Tangent Devices Color Correction Panels CP200 NEW'
|
Description
Digital Systems Media, LLC. Item Description This is an Auction on 4 New Tangent Devices Control Panels CP200-BK ( Trackerball / Knob panel) CP200-K ( Knob panel) CP200-TS (Transport / Selection panel) CP200-S ( Selection panel) NEW!!! CP200 Modular Control Panel Range Following on from the success of the CP100 Generic Control Panel, we are pleased to announce the launch of the CP200 Generic Modular Control Panel range. This range is designed to accommodate the requirements of users who need only certain features of the CP100, or who wish maximise the use of a physical interface by combining as many panel modules as they need, creating a panel set to exceed the capabilities of the CP100. Quality Components As with the CP100, the CP200 panels use proven high quality components. Some of these have their origins in the F1 motor racing and aerospace industries. The fascias are machined from a solid 12mm thick aluminium block giving the panel a strong, weighty feel that reinforces the overall feeling of quality. The displays are Vacuum Florescent Displays (VFD) which give a good contrast ratio and wide viewing angle, making them far superior to equivalent LCD or LED displays. All the control knobs are optical digital rotary encoders, giving a smooth high resolution response and a long life. Communications Each panel is simply patched into the host platform’s Ethernet network. The same generic protocol is used across all the panels. Although a more widely understood packet format (UDP) is used in the CP200 range, the internal protocol is an extension of the tried and tested CP100 protocol format making migration to the new platform as painless as possible. IP address assignment may be done automatically if a DHCP server is running on the network or explicitly by the application if not. This protocol provides basic information such as ‘key up’, ‘key down’, ‘encoder moved’ and ‘panel type’ for identification. The host system can drive the displays to indicate whatever it requires e.g. to label buttons or knobs. There is even the provision for ‘custom’ characters if the font set provided does not have the symbol needed. The simple protocol places no restrictions on what use the host system makes of the panel. General Specifications Displays Vacuum Florescent Displays (VFD). Encoders Continuous rotation, high resolution optical encoders. Enclosure Aluminium. Power Supply 5V, 4A d.c. with universal 100–240V a.c. input. Communication RJ45, 10baseT Ethernet, UDP, DHCP compliant. Mounting Sunk into desk on integral mounting lip left or free standing. Custom Solutions Custom solutions are available and if based on existing designs these can be rapidly brought to market. Options include number of displays, keys, encoders, trackerballs, protocol, layout, key legends and box finishes. Panel Types Currently there are 4 panel types: The CP200-BK, The CP200-TS and the CP200-K. Details of each of these can be found below. CP200-BK Trackerball / Knob Panel The CP200-BK is intended for users who require a control surface for primary colour grading with the addition of three knobs to control parameters such as pan/scan or basic secondary grading controls. It provides the operator with the familiar 3 trackerballs used to control lift, gamma and gain grading parameters. This arrangement gives a full 9 axes of simultaneous control that is impossible to achieve with either a mouse or pen and tablet. The trackerball units have been custom designed to fit with the ergonomics of the unit. Profiled outer rings provide the third axis of control and are weighted to give positive tactile feedback. The differential ball controls are slightly recessed and have an integral wrist rest giving a natural hand position for operation. Five keys are located just above each trackerball. It is suggested that two of these are used for master and differential resets with the other three available for application specific functions. The three rotary controls beneath the display are arranged as knob/button pairs. It is suggested that the buttons next to each knob are used as resets for the knobs. A single, angled, 40 x 2 character VFD display is located at the top of the panel which will be useful to indicate mode, value or status for the panel or the 3 knobs beneath it. Dimensions: Width (left to right): 332mm Depth (front to back): 381mm Height (rear): 78mm Height (front): 29mm CP200-TS Transport / Selection Panel The CP200-TS is intended to provide the user with a familiar transport layout for controlling VTR like source and record decks. In many applications these will not be 'real' VTR's, but instead will be data files stored on a computer based storage system. The Jog/Shuttle dial incorporates an electromagnetic clutch mechanism to give a tactile feedback when operating in shuttle mode. In this mode, the clutch is used to provide a 'notch' when passing through the STOP point, and 'end-stops' when the maximum shuttle speed is reached in either direction. This operation may be controlled automatically within the panel, or overridden by the controlling software on the host system. There is a numerical keypad for operations like timecode entry, and a set of keys labelled with typical grading and editing functions. A single, angled, 40 x 2 character VFD display is located at the top of the panel which will be useful to indicate mode, or can be used to label the 5 buttons beneath it. Dimensions: Width (left to right): 229mm Depth (front to back): 381mm Height (rear): 78mm Height (front): 29mm CP200-K Knob Panel The CP200-K is intended for users who require fingertip control of a large number of parameters, with each parameter having its own rotary control knob. The 12 rotary controls are arranged in 4 rows of 3 knob/button pairs. As with the CP200-BK, it is suggested that the buttons next to each knob are used as resets for the knobs. A single, angled, 40 x 2 character VFD display is located above each row of knobs which will be useful to indicate mode, value or status for the 3 knobs beneath it. Dimensions: Width (left to right): 229mm Depth (front to back): 381mm Height (rear): 78mm Height (front): 29mm CP200-S Selection Panel: Coming Soon The CP200-S is the latest addition to the CP200 panel range and is designed to complete the set. It has 4 rows of 5 buttons, with display above each row. The displays can either label the function of the buttons or provide at-a-glance feedback. The buttons themselves allow direct access to a function or can be used to access menu items. Each row has a "MORE" button to allow access to sub-menu items or further pages of controls. The CP200-S is now Availiable!!! Dimensions: Width (left to right): 229mm Depth (front to back): 381mm Height (rear): 78mm Height (front): 29mm Payment is by Credit Card, Money order or Paypal. Shipping will be determined at the close of the auction. We are Digital Systems Media, LLC of Irvine California, Tel: (949) 215-7151 Thanks for your interest! Item Condition NEW Full Manufacture Warranty Shipping Agreement Buyer will pay actual shipping costs, including extra for packaging only if needed. Shipping costs based on weight TBD after auction. Item(s) will be shipped via UPS, FedEx & DHL. Insured Only. Payment Information Paypal, Money order or a cashier check accepted, guarantees immediate shipping upon receipt and verification. Payment must be received within 3 days of the closing auction, NO EXCEPTIONS. effepbdcFinance This Equipment ForYour Business - Click Here Terms & Conditions Please e-mail any questions prior to bidding. Digital Systems Media, LLC. reserves the right to refuse a winning bid from a buyer with numerous negative feedback. Digital Systems Media, LLC. reserves the right to cancel the auction if bid retractions occur during last 24 hours of auction. Digital Systems Media, LLC ATTN: Saundra Cerutti 15 Studebaker Suite # 200Irvine, CA 92618 USAEmail Tel: 949-215-7151 Fax: 949-215-6399 http://www.digitalsystemsmedia.com/
Place a Bid!
|
|
|
Search
Categories
More related categories
 |